Technical Papers

Not sure exactly what criteria you should be considering for your specific system or needs? We've provided an honest, and unbiased, overview of the fluid selection process and the criteria that should be considered when choosing a fluid.

Proper Fluid Maintenance and Change-out Procedures

With literally thousands of uses for heat transfer fluids it is nearly impossible for any heat transfer fluid manufacturer to recommend an exact oil change interval or maintenance schedule.

Fluid Selection Guide for Systems Under 250 Gallons

For systems with a capacity under a few hundred gallons it is typical to find they are open to atmosphere...

Fluid Selection Guide for Systems Over 250 Gallons

In general systems over 250 gallons tend to be engineered in such a way that protects the fluid from elements...

Start-Up and Shutdown Procedures

Regardless of system design, size or heat source there are a few basic procedures that should be followed when starting up or shutting...

Dealing with Water in your System

Water in any high temperature heat transfer system is not only a nuisance it can be very dangerous. Care must always be taken to ensure water...

Extrusion and Heat Transfer Fluids

All hot oils (heat transfer fluids) have a limit to the time they can be utilized in an extruder. The key factor is mainly the type of fluid being used...